EFI E-85A, Инструкция по установке и обслуживанию

Страница: 70 / 143

70 Installation and Service Guide: Color Controller E-85A
Replacing parts
• When installing more than eight DIMMs, use the following table for the available slots.
Table 3:
Available DIMM slots
To replace a DIMM
1
Shut down the E-85A, remove all cables from the back, and open the system (see page 51 ).
To access the DIMMs, you must remove the left panel.
Number of
DIMMs 4 5 6 7 8 10 12 14 16
Set 0 - Socket A0 o o o o o o o o o
Set 0 - Socket A1 o o o o
Set 0 - Socket B0 o o o o o o o o o
Set 0 - Socket B1 o o o o
Set 0 - Socket C0 o o o o o o o o
Set 0 - Socket C1 o o o
Set 0 - Socket D0 o o o o o o
Set 0 - Socket D1 o o o
Set 1 - Socket A0 o o o o o o o o o
Set 1 - Socket A1 o o
Set 1 - Socket B0 o o o o o o o o o
Set 1 - Socket B1 o o
Set 1 - Socket C0 o o o o o o o
Set 1 - Socket C1 o
Set 1 - Socket D0 o o o o o
Set 1 - Socket D1 o