2-69
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
class-map
class-map
Use the
class-map
global configuration command on the switch stack or on a standalone switch to create
a class map to be used for matching packets to the class whose name you specify and to enter class-map
configuration mode. Use the
no
form of this command to delete an existing class map and to return to
global configuration mode.
class-map
[
match-all
|
match-any
]
class-map-name
no class-map
[
match-all
|
match-any
]
class-map-name
Syntax Description
Defaults
No class maps are defined.
If neither the
match-all
or
match-any
keyword is specified, the default is
match-all
.
Command Modes
Global configuration
Command History
Usage Guidelines
Use this command to specify the name of the class for which you want to create or modify class-map
match criteria and to enter class-map configuration mode.
The
class-map
command and its subcommands are used to define packet classification, marking, and
aggregate policing as part of a globally named service policy applied on a per-port basis.
After you are in quality of service (QoS) class-map configuration mode, these configuration commands
are available:
•
description
: describes the class map (up to 200 characters). The
show class-map
privileged EXEC
command displays the description and the name of the class-map.
•
exit
: exits from QoS class-map configuration mode.
•
match
: configures classification criteria. For more information, see the
match (class-map
configuration)
command.
•
no
: removes a match statement from a class map.
•
rename
: renames the current class map. If you rename a class map with a name that is already used,
the message
A class-map with this name already exists
appears.
match-all
(Optional) Perform a logical-AND of all matching statements under this class
map. All criteria in the class map must be matched.
match-any
(Optional) Perform a logical-OR of the matching statements under this class
map. One or more criteria must be matched.
class-map-name
Name of the class map.
Release
Modification
12.2(40)EX1
This command was introduced.
