B-65
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform sw-bridge
debug platform sw-bridge
Use the
debug platform sw-bridge
privileged EXEC command to enable debugging of the software
bridging function. Use the
no
form of this command to disable debugging.
debug platform sw-bridge
{
broadcast
|
control
|
multicast
|
packet
|
unicast
}
no debug platform sw-bridge
{
broadcast
|
control
|
multicast
|
packet
|
unicast
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug platform sw-bridge
command is the same as the
no debug platform sw-bridge
command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the
session
switch-number
privileged EXEC command. Then enter the
debug
command at the command-line
prompt of the stack member. You also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
broadcast
Display broadcast-data debug messages.
control
Display protocol-packet debug messages.
multicast
Display multicast-data debug messages.
packet
Display sent and received data debug messages.
unicast
Display unicast-data debug messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
