2-497
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show env
show env
Use the
show env
user EXEC command to display fan, temperature, and power information for the
switch or the switch stack.
show env
{
all
|
|
stack
[
switch-number
] |
temperature
[
status
]} [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Note
Though visible in the command-line help strings, the
rps
keyword is not supported.
Command Modes
User EXEC
Command History
Usage Guidelines
show env
user EXEC command to display the information for the switch being accessed—a standalone
switch or the stack master. Use this command with the
stack
and
switch
keywords to display all
information for the stack or for the specified stack member.
If you enter the
show env temperature status
command, the command output shows the switch
temperature state and the threshold level.
You can also use the
show env temperature
command to display the switch temperature status. The
command output shows the green and yellow states as
OK
and the red state as
FAULTY
. If you enter the
show env all
command, the command output is the same as the
show env temperature status
command
output.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
are not displayed, but the lines that contain
Output
are displayed.
all
Display the fan and temperature environmental status and the status of the internal
power supplies.
stack
[
switch-number
]
Display all environmental status for each switch in the stack or for the specified
switch. The range is 1 to 9, depending on the switch member numbers in the stack.
temperature
Display the switch temperature status.
temperature
status
(Optional) Display the switch internal temperature (not the external temperature)
and the threshold values.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(40)EX1
This command was introduced.
