1-6
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 1 Using the Command-Line Interface
CLI Command Modes
Line Configuration Mode
Line configuration commands modify the operation of a terminal line. Line configuration commands
always follow a line command, which defines a line number. Use these commands to change terminal
parameter settings line-by-line or for a range of lines.
Use the
line vty
line_number
[
ending_line_number
] command to enter line configuration mode. The
new prompt means line configuration mode. The following example shows how to enter line
configuration mode for virtual terminal line 7:
Switch(config)#
line vty 0 7
The supported commands can vary depending on the version of software in use. To display a
comprehensive list of commands, enter a question mark (
?
) at the prompt.
Switch(config-line)#
?
To exit line configuration mode and to return to global configuration mode, use the
exit
command. To
exit line configuration mode and to return to privileged EXEC mode, enter the
end
command, or press
Ctrl-Z
.
