B-87
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug sw-vlan ifs
debug sw-vlan ifs
Use the
debug sw-vlan ifs
privileged EXEC command to enable debugging of the VLAN manager IOS
file system (IFS) error tests. Use the
no
form of this command to disable debugging.
debug sw-vlan ifs
{
open
{
read
|
write
} |
read
{
1
|
2
|
3
|
4
} |
write
}
no debug sw-vlan ifs
{
open
{
read
|
write
} |
read
{
1
|
2
|
3
|
4
} |
write
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug sw-vlan ifs
command is the same as the
no debug sw-vlan ifs
command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the
session
switch-number
privileged EXEC command. Then enter the
debug
command at the command-line
prompt of the stack member. You also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
When selecting the file read operation, Operation
1
reads the file header, which contains the header
verification word and the file version number. Operation
2
reads the main body of the file, which
contains most of the domain and VLAN information. Operation
3
reads type length version (TLV)
descriptor structures. Operation
4
reads TLV data.
Related Commands
open
{
read
|
write
}
Display VLAN manager IFS file-open operation debug messages. The
keywords have these meanings:
•
read
—Display VLAN manager IFS file-read operation debug messages.
•
write
—Display VLAN manager IFS file-write operation debug messages.
read
{
1
|
2
|
3
|
4
}
Display file-read operation debug messages for the specified error test (1, 2, 3,
or 4).
write
Display file-write operation debug messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
show vlan
Displays the parameters for all configured VLANs or one VLAN (if the
VLAN name or ID is specified) in the administrative domain.
