B-74
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug qos-manager
debug qos-manager
Use the
debug qos-manager
privileged EXEC command to enable debugging of the quality of service
(QoS) manager software. Use the
no
form of this command to disable debugging.
debug qos-manager
{
all
|
event
|
verbose
}
no debug qos-manager
{
all
|
event
|
verbose
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug qos-manager
command is the same as the
no debug qos-manager
command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the
session
switch-number
privileged EXEC command. Then enter the
debug
command at the command-line
prompt of the stack member. You also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
all
Display all QoS-manager debug messages.
event
Display QoS-manager related-event debug messages.
verbose
Display QoS-manager detailed debug messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
