C-13
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform ip unicast
show platform ip unicast
Use the
show platform ip unicast
privileged EXEC command to display platform-dependent IP unicast
routing information.
show platform ip unicast
{
adjacency
|
cef-idb
|
counts
|
dhcp
|
failed
{
adjacency
|
arp
[
A.B.C.D
]
|
route
} |
loadbalance
|
mpaths
|
proxy
|
route
|
rpf
{
A.B.C.D
{
A.B.C.D
} |
stats
interface-id
}
standby
|
statistics
|
table
|
trace
} [ |
{
begin
|
exclude
|
include
}
expression
]
Syntax Description
Note
Though visible in the command-line help strings, the
proxy
and
table
keywords are not supported.
adjacency
Display the platform adjacency database.
cef-idb
Display platform information corresponding to Cisco Express Forwarding
(CEF) interface descriptor block.
counts
Display the current counts for the Layer 3 unicast databases.
dhcp
Display the DHCP system dynamic addresses.
failed
{
adjacency
|
arp
[
A.B.C.D
]
|
route
}
Display the hardware resource failures. The keywords have these meanings:
•
adjacency
—Display the adjacency entries that failed to be programmed
in hardware.
•
arp
—Display the Address Resolution Protocol (ARP) deletions because
of failure and because of retries.
•
A.B.C.D—
(Optional) Prefix of the ARP entries to display.
•
route
—Display the route entries that failed to be programmed in
hardware.
loadbalance
Display the platform load-balance database.
mpaths
Display the Layer 3 unicast routing multipath adjacency database.
proxy
Display the platform proxy ARP database.
route
Display the platform route database.
rpf
{
A.B.C.D
{
A.B.C.D
} |
stats
interface-id
}
Display the unicast reverse path forwarding (unicast RPF) platform
information. The keywords have these meanings:
•
A.B.C.D
{
A.B.C.D
}
—
Prefix and prefix mask of the RPF entries to
display.
stats
—
Display the unicast RPF statistics for the specified interface.
standby
Display the platform standby information.
statistics
Display the Layer 3 unicast routing accumulated statistics.
table
Display the platform IP version 4 (IPv4) information.
trace
Display the platform event trace logs.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
