2-498
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show env
Examples
This is an example of output from the
show env all
command on a standalone switch:
Switch>
show env all
This is an example of output from the
show env stack
command:
Switch>
show env stack
SWITCH: 1
FAN is OK
TEMPERATURE is OK
Temperature Value: 33 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 65 Degree Celsius
Red Threshold : 75 Degree Celsius
POWER is OK
RPS is AVAILABLE
<output truncated>
This example shows how to display information about stack member 3 from the master switch:
Switch>
show env stack 3
SWITCH: 3
FAN is OK
TEMPERATURE is OK
Temperature Value: 33 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 65 Degree Celsius
Red Threshold : 75 Degree Celsius
POWER is OK
RPS is AVAILABLE
This example shows how to display the temperature value, state, and the threshold values on a standalone
switch.
Table 2-25
describes the temperature states in the command output.
Switch>
show env temperature status
Table 2-25
States in the show env temperature status Command Output
State
Description
Green
The switch temperature is in the
normal
operating range.
Yellow
The temperature is in the
warning
range. You should check the external temperature
around the switch.
Red
The temperature is in the
critical
range. The switch might not run properly if the
temperature is in this range.
