2-35
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
authentication periodic
authentication periodic
Use the
authentication periodic
interface configuration command to enable or disable reauthentication
on a port. Enter the
no
form of this command to disable reauthentication.
authentication periodic
no authentication periodic
Command Default
Reauthentication is disabled.
Command Modes
Interface configuration
Command History
Usage Guidelines
You configure the amount of time between periodic re-authentication attempts by using the
authentication
timer reauthentication
interface configuration command.
Examples
This example shows how to enable periodic reauthentication on a port:
Switch(config)#
authentication periodic
This example shows how to disable periodic reauthentication on a port:
Switch(config)#
no
authentication periodic
You can verify your settings by entering the
show authentication
privileged EXEC command.
Related Commands
Release
Modification
12.2(50)SE
This command was introduced.
Command
Description
authentication
control-direction
Configures the port mode as unidirectional or bidirectional.
authentication event
Sets the action for specific authentication events.
authentication
fallback
Configures a port to use web authentication as a fallback method for clients
that do not support IEEE 802.1x authentication.
authentication
host-mode
Sets the authorization manager mode on a port.
authentication open
Enables or disable open access on a port.
authentication order
Sets the order of authentication methods used on a port.
authentication
port-control
Enables manual control of the port authorization state.
authentication
priority
Adds an authentication method to the port-priority list.
