B-38
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform fallback-bridging
debug platform fallback-bridging
Use the
debug platform fallback-bridging
privileged EXEC command to enable debugging of the
platform-dependent fallback bridging manager. Use the
no
form of this command to disable debugging.
debug platform fallback-bridging
[
error
|
retry
|
rpc
{
events
|
messages
}]
no debug platform fallback-bridging
[
error
|
retry
|
rpc
{
events
|
messages
}]
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
If you do not specify a keyword, all fallback bridging manager debug messages appear.
The
undebug platform fallback-bridging
command is the same as the
no debug platform
fallback-bridging
command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the
session
switch-number
privileged EXEC command. Then enter the
debug
command at the command-line
prompt of the stack member. You also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
error
(Optional) Display fallback bridging manager error condition messages.
retry
(Optional) Display fallback bridging manager retry messages.
rpc
{
events
|
messages
}
(Optional) Display fallback bridging debugging information. The
keywords have these meanings:
•
events
—Display remote procedure call (RPC) events.
•
messages
—Display RPC messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
