2-188
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
ip admission
ip admission
Use the
ip admission
interface configuration command to enable web authentication. You can also use
this command in fallback-profile mode. Use the
no
form of this command to disable web authentication.
ip admission
rule
no ip admission
Syntax Description
Command Modes
Global configuration
Command History
Usage Guidelines
The
ip admission
command applies a web authentication rule to a switch port.
Examples
This example shows how to apply a web authentication rule to a switchport:
Switch#
configure terminal
Switch(config)#
interface gigabitethernet1/0/1
Switch(config-if)#
ip admission rule1
This example shows how to apply a web authentication rule to a fallback profile for use on an
IEEE 802.1x enabled switch port.
Switch#
configure terminal
Switch(config)#
fallback profile profile1
Switch(config)#
ip admission name rule1
Switch(config)#
end
Related Commands
rule
Apply an IP admission rule to the interface.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
dot1x fallback
Configure a port to use web authentication as a fallback method for clients
that do not support IEEE 802.1x authentication.
fallback profile
Enable web authentication on a port
ip admission name
proxy http
Enable web authentication globally on a switch
show ip admission
Displays information about NAC cached entries or the NAC configuration.
For more information, see the
Network Admission Control Software
Configuration Guide
on Cisco.com.
