Dell Catalyst 3032, Справочник по командам

Страница: 161 / 1082

2-131
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
dot1x default
dot1x default
Use the dot1x default interface configuration command on the switch stack or on a standalone switch
to reset the IEEE 802.1x parameters to their default values.
dot1x default
Syntax Description This command has no arguments or keywords.
Defaults These are the default values:
•
The per-port IEEE 802.1x protocol enable state is disabled (force-authorized).
•
The number of seconds between re-authentication attempts is 3600 seconds.
•
The periodic re-authentication is disabled.
•
The quiet period is 60 seconds.
•
The retransmission time is 30 seconds.
•
The maximum retransmission number is 2 times.
•
The host mode is single host.
•
The client timeout period is 30 seconds.
•
The authentication server timeout period is 30 seconds.
Command Modes
Interface configuration
Command History
Examples This example shows how to reset the IEEE 802.1x parameters on a port:
Switch(config-if)# dot1x default
You can verify your settings by entering the show dot1x [ interface interface-id ] privileged EXEC
command.
Related Commands
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
show dot1x [ interface interface-id ] Displays IEEE 802.1x status for the specified port.