B-56
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform port-asic
debug platform port-asic
Use the
debug platform port-asic
privileged EXEC command to enable debugging of the port
application-specific integrated circuit (ASIC) driver. Use the
no
form of this command to disable
debugging.
debug platform port-asic
{
interrupt
|
periodic
|
read
|
stack
|
write
}
no debug platform port-asic
{
interrupt
|
periodic
|
read
|
stack
|
write
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug platform port-asic
command is the same as the
no debug platform port-asic
command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the
session
switch-number
privileged EXEC command. Then enter the
debug
command at the command-line
prompt of the stack member. You also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
interrupt
Display port-ASIC interrupt-related function debug messages.
periodic
Display port-ASIC periodic-function-call debug messages.
read
Display port-ASIC read debug messages.
stack
Display stacking-related function debug messages.
This keyword is supported only on stacking-capable switches.
write
Display port-ASIC write debug messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
