2-96
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
copy logging onboard
copy logging onboard
Use the
copy logging onboard
privileged EXEC command on the switch stack or on a standalone switch
to copy on-board failure logging (OBFL) data to the local network or a specific file system.
copy logging onboard module
stack-member destination
Syntax Description
Defaults
This command has no default setting.
Command Modes
Privileged EXEC
module
stack-member
Specify the stack member number. If the switch is a standalone switch, the switch
number is 1. If the switch is in a stack, the range is 1 to 9, depending on the switch
member numbers in the stack.
This keyword is supported only on stacking-capable switches.
destination
Specify the location on the local network or file system to which the system
messages are copied.
For
destination,
specify
t
he destination on the local or network file system and the
filename. These options are supported:
•
The syntax for the local flash file system:
flash
[
number
]
:/
filename
Use the
number
parameter to specify the stack member number of the stack
master. The range for
number
is 1 to 9.
•
The syntax for the FTP:
ftp://
username
:
password@host
/
filename
•
The syntax for an HTTP server:
http://
[[
username
:
password
]@]{
hostname
|
host-ip
}[/
direct
o
ry
]
/filename
•
The syntax for the NVRAM:
nvram:/
filename
•
The syntax for the null file system:
null:/
filename
•
The syntax for the Remote Copy Protocol (RCP):
rcp://
username
@
host
/
filename
•
The syntax for the switch file system:
system:
filename
•
The syntax for the temporary file system:
tmpsys:/
filename
•
The syntax for the TFTP:
tftp:
[[
//
location
]/
directory
]
/
filename
