2-164
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
errdisable detect cause small-frame
errdisable detect cause small-frame
Use the
errdisable detect cause small-frame
global configuration command on the switch stack or on
a standalone switch to allow any switch port to be error disabled if incoming VLAN-tagged packets are
small frames (67 bytes or less) and arrive at the minimum configured rate (the threshold). Use the
no
form of this command to return to the default setting.
errdisable detect cause small-frame
no errdisable detect cause small-frame
Syntax Description
This command has no arguments or keywords.
Defaults
This feature is disabled.
Command Modes
Global configuration
Command History
Usage Guidelines
This command globally enables the small-frame arrival feature. Use the
small violation-rate
interface
configuration command to set the threshold for each port.
You can configure the port to be automatically re-enabled by using the
errdisable recovery cause
small-frame
global configuration command. You configure the recovery time by using the
errdisable
recovery interval
interval
global configuration command.
Examples
This example shows how to enable the switch ports to be put into the error-disabled mode if incoming
small frames arrive at the configured threshold:
Switch(config)#
errdisable detect cause small-frame
You can verify your setting by entering the
show interfaces
privileged EXEC command.
Release
Modification
12.2(46)SE
This command was introduced.