2-442
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show access-lists
show access-lists
Use the
show access-lists
privileged EXEC
command
to display access control lists (ACLs) configured
on the switch.
show access-lists
[
name
|
number
|
hardware counters | ipc
] [
|
{
begin
|
exclude
|
include
}
expression
]
Syntax Description
Note
Though visible in the command-line help strings, the
rate-limit
keywords are not supported.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The switch supports only IP standard and extended access lists. Therefore, the allowed numbers are only
1 to 199 and 1300 to 2699.
This command also displays the MAC ACLs that are configured.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
are not displayed, but the lines that contain
Output
are displayed.
name
(Optional) Name of the ACL.
number
(Optional) ACL number. The range is 1 to 2699.
hardware counters
(Optional) Display global hardware ACL statistics for switched and
routed packets.
ipc
(Optional) Display Interprocess Communication (IPC) protocol
access-list configuration download information.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(40)EX1
This command was introduced.
