B-57
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform port-security
debug platform port-security
Use the
debug platform port-security
privileged EXEC command to enable debugging of
platform-dependent port-security information. Use the
no
form of this command to disable debugging.
debug platform port-security
{
add
|
aging
|
all
|
delete
|
errors
|
rpc
|
warnings
}
no debug platform port-security
{
add
|
aging
|
all
|
delete
|
errors
|
rpc
|
warnings
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug platform port-security
command is the same as the
no debug platform port-security
command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the
session
switch-number
privileged EXEC command. Then enter the
debug
command at the command-line
prompt of the stack member. You also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
add
Display secure address addition debug messages.
aging
Display secure address aging debug messages.
all
Display all port-security debug messages.
delete
Display secure address deletion debug messages.
errors
Display port-security error debug messages.
rpc
Display remote procedure call (RPC) debug messages.
warnings
Display warning debug messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
