2-585
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show logging
show logging
Use the
show
logging
privileged EXEC command to display the on-board failure logging (OBFL)
information.
show logging onboard
[
module
[
switch-number
]] {{
clilog
|
environment
|
message
|
temperature
|
uptime
|
voltage
} [
continuous
|
detail
|
summary
] [
start
hh:mm:ss day month year
] [
end
hh:mm:ss day month year
]} [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
module
[
switch-number
]
(Optional) Display OBFL information about the specified switches.
On stacking-capable switches, use the
switch-number
parameter to
specify the switch number, which is the stack member number. If the
switch is a standalone switch, the switch number is 1. If the switch is
in a stack, the range is 1 to 9, depending on the switch member numbers
in the stack.
On nonstacking-capable switches, the
switch-number
parameter is
always
1
.
For more information about this parameter, see the “Usage Guidelines”
section for this command.
clilog
Display the OBFL CLI commands that were entered on the standalone
switch or specified stack members.
environment
Display the unique device identifier (UDI) information for the
standalone switch or specified stack members and for all the connected
FRU devices: the product identification (PID), the version
identification (VID), and the serial number.
message
Display the hardware-related system messages generated by the
standalone switch or specified stack members.
temperature
Display the temperature of the standalone switch or specified stack
members.
uptime
Display the time when the standalone switch or specified stack
members start, the reason the switch or specified members restart, and
the length of time the standalone switch or specified stack members
have been running since they last restarted.
voltage
Display the system voltages of the standalone switch or the specified
switch stack members.
continuous
(Optional) Display the data in the
continuous
file.
summary
(Optional) Display the data in the
summary
file.
start
hh:mm:ss day month
year
(Optional) Display the data from the specified time and date. For more
information, see the “Usage Guidelines” section.
end
hh:mm:ss day month year
(Optional) Display the data up to the specified time and date. For more
information, see the “Usage Guidelines” section.
detail
(Optional) Display both the continuous and summary data.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
