Daikin VRVII, Руководство пользователя

Страница: 24 / 385

Troubleshooting by Remote Controller
19
2.2 Self-diagnosis by Wired
Remote Controller
2.2.1 Wired Remote Controller —
BRC1D61
If operation stops due to error, the remote controller’s
operation LED blinks, and error code is displayed. (Even
if stop operation is carried out, error contents are
displayed when the inspection mode is entered.) The
error code enables you to tell what kind of error caused
operation to stop. Refer to P.24 for error code and error
contents.
Note:
1. Pressing the INSPECTION/TEST button will blink the
check indication.
2. While in service mode, holding down the ON/OFF
button for a period of 5 seconds or more will clear the
error history indication shown above. In this case, on
the codes display, the error code will blink twice and
then change to “00” (= Normal), the Unit No. will
change to “0”, and the operation mode will
automatically switch from service mode to normal
mode (displaying the set temperature).
Operation LED
ON/OFF
button
Error code
Inspection
display
Inspection/Test
button
Display of indoor
unit for which an
error has been
detected