F-17
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Appendix F RDBMS Synchronization Import Definitions
Action Codes
123
ADD_DIAL_
ACCESS_FILTER
UN|GN,
V1, V2
Add a dial-up filter for the user|group.
V1 should contain one of the following values:
•
Calling station ID
•
Called station ID
•
Calling and called station ID; for example:
01732-875374,0898-69696969
•
AAA client IP address, AAA client port; for
example:
10.45.6.123,tty0
V2 should contain the filter type as one of the following
values:
•
CLID—The user is filtered by the calling station ID.
•
DNIS—The user is filtered by the called station ID.
•
CLID/DNIS—The user is filtered by both calling
and called station IDs.
•
AAA client/PORT—The user is filtered by AAA
client IP and AAA client port address.
130
SET_TOKEN_
CACHE_SESSION
GN, V1
Enable/disable token caching for an entire session; V1 is
0=disable, 1=enable.
131
SET_TOKEN_
CACHE_TIME
GN, V1
Set the duration that tokens are cached. V1 is the token
cache duration in seconds.
140
SET_TODDOW_
ACCESS
UN|GN, V1 Set periods during which access is permitted. V1 contains
a string of 168 characters. Each character represents a
single hour of the week. A “1” represents an hour that is
permitted, while a “0” represents an hour that is denied.
If this parameter is not specified for a user, the group
setting applies. The default group setting is
“111111111111” and so on.
Table F-4
Action Codes for Initializing and Modifying Access Filters (continued)
Action
Code
Name
Required
Description
