Chapter 7 Setting Up and Managing User Accounts
Advanced User Authentication Settings
7-36
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Step 2
Do one of the following:
•
To use the information configured in the Password Authentication section,
select Use CiscoSecure PAP password.
Note
For information about basic password setup, see
Adding a Basic User
Account, page 7-5
.
•
To use an external database password, select Use external database
password, and then choose from the list the database that authenticates the
enable password for this user.
Note
The list of databases displays only the databases that you have
configured. For more information, see
About External User
Databases, page 11-4
.
•
To use a separate password, click Use separate password, and then type and
retype to confirm a control password for this user. This password is used in
addition to the regular authentication.
Step 3
Do one of the following:
•
If you are finished configuring the user account options, click Submit to
record the options.
•
To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
Setting Outbound Password for a User
The outbound password enables a AAA client to authenticate itself to
another AAA client via outbound authentication. The outbound authentication
can be PAP, CHAP, MS-CHAP, or ARAP, and results in the Cisco Secure ACS
password being given out. By default, the user ASCII/PAP or
CHAP/MS-CHAP/ARAP password is used. To prevent compromising inbound
passwords, you can configure a separate SENDAUTH password.
