Appendix F RDBMS Synchronization Import Definitions
Action Codes
F-16
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Transactions using these codes affect the configuration displayed in the User
Setup and Group Setup sections of the HTML interface. For more information
about the User Setup section, see
Chapter 7, “Setting Up and Managing User
Accounts.”
For more information about the Group Setup section, see
Chapter 6,
“Setting Up and Managing User Groups.”
Table F-4
Action Codes for Initializing and Modifying Access Filters
Action
Code
Name
Required
Description
120
INIT_NAS_
ACCESS_
CONTROL
UN|GN,V1
Clear the AAA client access filter list and initialize
permit/deny for any forthcoming filters. V1 should be
one of the following values:
•
ACCESS_PERMIT
•
ACCESS DENY
121
INIT_DIAL_
ACCESS_
CONTROL
UN|GN,V1
Clear the dial-up access filter list and initialize
permit/deny for any forthcoming filters. V1 should be
one of the following values:
•
ACCESS_PERMIT
•
ACCESS DENY
122
ADD_NAS_
ACCESS_FILTER
UN|GN,V1
Add a AAA client filter for the user|group.
V1 should contain a single (AAA client name, AAA
client port, remote address, CLID) tuple; for example:
NAS01,tty0,0898-69696969
Optionally, the AAA client name can be “All AAA
clients” to specify that the filter applies to all configured
AAA clients and an asterisk (*) to represent all ports.
