Chapter 4 Setting Up and Managing Network Configuration
AAA Server Configuration
4-26
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
To edit a AAA server, follow these steps:
Step 1
In the navigation bar, click Network Configuration.
Result: The Network Configuration page opens.
Step 2
Do one of the following:
•
If you are using NDGs, click the name of the NDG to which the AAA server
is assigned. Then, in the AAA Servers table, click the name of the AAA
server to be edited.
•
If you have not enabled NDGs, in the AAA Servers table, click the name of
the AAA server to be edited.
Result: The AAA Server Setup for X page appears.
Step 3
Enter or select new settings for one or more of the following fields:
•
AAA Server IP Address
•
Key
•
Log Update/Watchdog Packets from this remote AAA Server
•
AAA Server Type
•
Traffic Type
Step 4
To save your changes and apply them immediately, click Restart.
Tip
To save your changes and apply them later, click Submit. When you are ready to
implement the changes, click System Configuration, click Service Control, and
then click Restart.
Note
Restarting the service clears the Logged-in User report and temporarily
interrupts all Cisco Secure ACS services. This affects the Max Sessions
counter and resets it to zero.
