Canon iR7086, Руководство по обслуживанию

Страница: 69 / 735

Chapter 2
2-11
2.2 Unpacking and Installation
2.2.1 Points to Note When Turning On/Off the Main Power
0011-4949
iR7105 / iR7095 / iR7086 / iR7095P
2.2.2 Unpacking
0010-8941
iR7105 / iR7095 / iR7086
1) Unpack the machine.
Open the plastic bag.
2) Remove the grip cover (rear) [1] found on the right side of the machine
using a flat-blade screwdriver, and shift up the grip [2] found at the rear.
F-2-11
3) Take out the grip [1] from the contents box.
F-2-12
4) Open the upper right cover and slide the face cover (small) [1] in the di-
rection of A arrow. Then, detach the face cover (large) [2] in the direction
of B arrow.
F-2-13
5) Insert the grip [1] taken out in step 3) into the machine at an angle while
holding down the spring [2]; then, keep the grip in horizontal orientation
so that the claw [3] is hooked on the plate at the rear.
F-2-14
6) Close the upper right cover.
7) Shift up the grip (front, rear) [1] found on the left side of the machine.
F-2-15
8) Holding the grips (front, rear) on the delivery side of the machine, lift the
machine slightly to remove the pad.
At this time, put away the plastic bag toward the pad.
Turning Off the Main Power (host machine)
Be sure to go through the following when turning off the main power to
protect the hard disk:
1. Hold down the control panel power switch for 3 sec or more.
2. Go through the instructions on the shut-down sequence screen so that the
main switch may be turned off.
3. Turn off the main power switch.
4. Disconnect the power cable (for the power outlet).
Order of Turning On the Machines (host m accessories)
When mounting delivery options, such as finisher, be sure to turn on the
power of main body and option.
If you do not turn on the power in the correct order, the main body cannot
detect the option.
<Turning On the Power>
1. high-capacity stacker, perfect Binder, finisher (either)
2. professional puncher
3. host machine
[1]
[2]
[1]
Be sure to go through steps 8) and 9) in correct sequence; otherwise, the
machine can become displaced.
[1]
[2]
[B]
[A]
[1]
[2]
[3]
[1]
[1]