Canon iR7086, Руководство по обслуживанию

Страница: 581 / 735

Chapter 16
16-17
*: In the event of '1320' jam (stationary jam at power-on), following sensors are capable of checking the paper level from Service Mode (I/O Display)
1165 Tray B registration sensor stationary
(inserter) S13 Indicates that during paper-feeding, the tray B registration sensor fails to detect the
absence of paper when a specific period of time passes after detecting the presence
of paper at the tray B registration sensor.
1167 Feeding path sensor 1 stationary (inserter) S14 Indicates that during paper-feeding, the feeding sensor fails to detect the absence of
paper when a specific period of time passes after detecting the presence of paper at
the feeding sensor.
1169 Feeding path sensor 2 stationary (inserter;
for perfect binder only) S18 Indicates that during paper-feeding, the feeding sensor 2 fails to detect the absence
of paper when a specified period of time passes after detecting the presence of paper
at the feeding sensor 2.
116B Pre-confluence sensor stationary (inserter;
for finisher only) S18 Indicates that during paper-feeding, the confluence sensor fails to detect the absence
of paper when a specified period of time passes after detecting the presence of paper
at the confluence sensor.
1183 Feeding path paper sensor 1 stationary
(paper-folding unit) PI76 Indicates that paper does not pass the feeding path paper sensor 1 (PI76) within a
specified period of time.
1185 Feeding path paper sensor 2 stationary
(paper-folding unit) S8 Indicates that paper does not pass the feeding path paper sensor 3 (S8) within a
specified period of time.
1187 Feeding path paper sensor 3 stationary
(paper-folding unit) S8 Indicates that paper does not pass the feeding path paper sensor 3 (S8) within a
specified period of time.
1189 Feeding path paper sensor 4 stationary
(paper-folding unit) PI75 Indicates that paper does not pass the feeding path paper sensor 4 (PI75) within a
specified period of time.
11A2 Bypass stationary (professional puncher) S1, S8 Indicates that paper does not pass the sensors within a specified period of time.
11A3 Punch path stationary (professional
puncher) S2, S3, S4, S5, S6 Indicates that paper does not pass the sensors within a specified period of time.
11A4 Finisher reception fault (professional
puncher) S7 Indicates the delivery signal failure from the puncher.
1320 Residual (at power-on) All sensors within
delivery optional
devices (*) Indicates the presence of residual paper in the feeding assembly at power-on.
1374 Power-on (inserter) S5,S13,S14,S18 Indicates the detection of presence of residual paper on the feeding path of the
inserter at power-on.
13A2 Bypass residual (professional puncher) S1, ,S7, S8 Indicates the presence of residual paper in the bypass assembly at power-on.
13A3 Punch path residual (professional puncher) S2, S3, S4, S5, S6 Indicates the presence of residual paper in the punch path assembly at power-on.
1422 Door open MSW1 The front cover switch (MSW1) has identified the front cover as being open during
machine operation.
1475 Door open (inserter) S15,S17 Indicates that cover is opened during the operation of the inserter.
1524 Staple jam (finisher stacker assembly) SU Indicates the machine fails to detect the start of the staple motor (M25) a specific
period of time after the start of the motor.
1550 Staple jam (saddle assembly) SU Indicates the machine fails to detect the start of the stitcher motor (M110) a specific
period of time after the start of the motor.
1721 Residual (at initial rotation) All sensors within
delivery optional
devices Indicates the presence of residual paper in the feeding assembly during initial
rotation.
1F25 processing tray load timing fault PS6 Software control timing fault
1F52 Saddle stop plate PS110 The saddle stop plate sensor (PS110) does not detect the start-up of the saddle motor
stop plate motor (M106) within a specific period of time.
1F70 Tray A paper absence (inserter) S1 Indicates that the machine receives the pickup request signal while paper is absent
on the Tray A.
1F71 Tray B paper absence (inserter) S6 Indicates that the machine receives the pickup request signal while paper is absent
on the Tray B.
1F72 Paper size mismatch (inserter) S7 Indicates that the paper size detected during feeding and the paper size notified to
the machine are different.
1F73 Pickup cancel NG (inserter) - Indicates that after the pickup request for the inserter, pickup cancellation is
unavailable despite the inability of the machine to feed paper from the inserter due
to causes including jam occurrence.
1FA4 Reach-to-finisher delay (professional
puncher) S7 Indicates that paper does not reach the finisher within a specific period of time.
Sensor name Sensor No. COPIER > I/O Display >
SORTER Presence/absence of paper
Port No. Bit No.
Plain finisher (Finisher-V1) Lower delivery sensor PS6 P024 Bit 8 0: paper absent 1: paper present
Buffer path 2 sensor UN14 P024 Bit 9 1: paper absent 0: paper present
Buffer path 1 sensor UN13 P024 Bit 11 1: paper absent 0: paper present
Shift unit sensor PS4 P024 Bit 12 0: paper absent 1: paper present
Inlet sensor PS3 P024 Bit 13 0: paper absent 1: paper present
Upper delivery sensor PS5 P024 Bit 14 0: paper absent 1: paper present
Lower path sensor UN24 P024 Bit 15 1: paper absent 0: paper present
Jam
Code Type Sensor Description