Canon iR7086, Руководство по обслуживанию

Страница: 524 / 735

Chapter 14
14-24
14.8.13 Position of the Multifeeder Latch Solenoid (SL6)
0010-9352
iR7105 / iR7095 / iR7086
Slide the solenoid in the direction of A so that the gap between the shutter
[1] and the shutter plate [2] is 0.4 -/+ 0.2 mm when the solenoid is drawn.
F-14-64
F-14-65
14.8.14 Position of the Deck (right) Pickup Solenoid (SL7)
0010-9353
iR7105 / iR7095 / iR7086
Use the screw [3] so that the distance from the pickup unit bottom of each
cassette holder and the bushing bottom edge of the A roller support plate is
34.0 -/+ 0.5 mm when the plunger of the pickup roller releasing solenoid is
drawn (as occurring when [1] and [2] are operated as shown). (After adjust-
ment, make sure that the distance between the paper face and the A roller is
2.5 -/+ 0.5 mm when the A roller is in UP position.)
F-14-66
14.8.15 Position of the Deck (Left) Pickup Solenoid (SL8)
0010-9354
iR7105 / iR7095 / iR7086
Use the screw [3] so that the distance from the pickup unit bottom face to the
bushing bottom edge of the A roller support plate is 49.5 -/+ 0.5 mm when
the plunger of the pickup releasing solenoid is drawn (as occurring when [1]
and [2] are operated as shown). (After adjustment, make sure that the dis-
tance between the paper face and the A roller is 2.5 -/+ 0.5 mm when the A
roller is in UP position.)
F-14-67
14.8.16 Position of the Cassette 3/4 Pickup Solenoid (SL9/
10)
0010-9356
iR7105 / iR7095 / iR7086
Use the screw [3] so that the distance from the pickup unit bottom face of
each cassette holder and the bushing bottom edge of the A roller support
plate is 35.5 -/+ 0.5 mm when the plunger of the pickup roller releasing so-
lenoid is drawn (as occurring when [1] and [2] are operated as shown). (After
adjustment, make sure that the distance between the paper face and the A
roller is 2.5 -/+ 0.5 mm when the A roller is in UP position.)
F-14-68
14.8.17 Position of the Side Paper Deck Pickup Roller
Releasing Solenoid
0010-9357
iR7105 / iR7095 / iR7086
Before removing the deck pickup roller releasing solenoid [1] from the sup-
port plate, make mental notes of the positions of the 2 fixing screws [2] of
the solenoid with reference to the index on the support plate. (Or, mark the
position of the solenoid on the support plate with a scriber.)
If you are replacing the solenoid on its own, you must secure it in its initial
position.
A
[1] [2]
0.4±0.2mm 0.4±0.2mm
[1]
[1]
[2]
[2]
A
View from A
34.0±0.5mm
[3]
[2]
[1]
[1]
[2]
A
View from A
49.5±0.5mm
[3]
[1]
[2]
[1]
[2]
A
View from A
35.5±0.5mm
[3]