Canon iR7086, Руководство по обслуживанию

Страница: 579 / 735

Chapter 16
16-15
0002 post-separation sensor PI7 - The separation sensor detects paper when paper has been moved 500 mm (if extra-
length, +200 mm) -45.5 mm after registration pickup.
- the sensor goes on (paper with hole) before paper has been fed 12 mm after the
detection of the trailing edge; the separation sensor detects paper after paper has been
fed 50 mm from when the separation senor has gone on.
0003 registration sensor PI1 The registration sensor does not detect paper a feed length of 134.8 mm after the post-
separation sensor has gone on.
0004 registration sensor PI1 The read sensor goes off before the registration sensor goes off.
0005 read sensor PI8 - The read sensor does not detect paper a feed length of 364.2 mm (182.1 x 2) from the
point of registration.
- The read sensor does not detect paper a feed length of 157.4 mm (78.7 x 2) from the
point of No. 2 registration.
0006 read sensor PI8 - The read sensor detects paper a feed length of 500 mm (if extra-length, +200 mm) after
the start of feed, resumed after a temporary stop for reading.
- At time of LTRR/LGL identification in mix mode, the read sensor detects paper a feed
length of 514 mm after the start of feed from the edging wait point.
0007 delivery reversal sensor PI9 If not in high-speed duplexing mode, the delivery sensor does not detect paper when
paper is moved 132.1 mm after it has reached the leading edge lower stream roller with
reference to the activation of the read sensor.
0008 delivery reversal sensor PI9 The delivery sensor detects paper a feed length of 161.9 mm after the trailing edge read
end point.
0042 post-separation sensor PI7 1st sheet, post-separation sensor, stationary
0043 registration sensor PI1 1st sheet, registration sensor, non arrival
0044 registration sensor PI1 1st sheet, registration sensor, stationary
0045 read sensor PI8 1st sheet, read sensor, non arrival
0046 read sensor PI8 1st sheet, read sensor, stationary
0047 delivery reversal sensor PI9 1st sheet, delivery sensor, non arrival
0048 delivery reversal sensor PI9 1st sheet, delivery sensor, stationary
0071 TIMING NG - fault in software timing
0073 TIMING NG - fault in shift motor
0090 ADF open/closed sensor 1 PS502 The ADF has been opened while in operation.
0091 ADF open/closed sensor 1 PS502 The ADF has been opened while in operating (paper wait).
0092 DF cover open/closed sensor PI6 The cover has been opened while in operation (drive system in operation).
0093 DF cover open/closed sensor PI6 The cover has been opened while in operation (paper wait).
0094 registration sensor, separation sensor, feed
sensor, delivery reversal sensor PI1, PI7, PI8,
PI9 Paper has been detected in the path while the 1st sheet is being picked up.
0095 original set sensor, DF cover open/closed
sensor, ADF open/closed sensor 1 PI5, PI6, PS502 With no paper in the tray or while the tray is open, the start of pickup operation is
detected.
Code Sensor Notation Description