Canon iR7086, Руководство по обслуживанию

Страница: 291 / 735

Chapter 7
7-45
F-7-125
3) Remove the dust-collecting roller arm [1] and the twisted spring [2]; then,
detach the dusts-collecting roller [3].
F-7-126
7.10.19 Charging Wire
7.10.19.1 Outline
0010-8934
iR7105 / iR7095 / iR7086
As many as 3 charging wires are found around the photosensitive drum (pri-
mary, pre-transfer, transfer/separation); these wires are 0.06 mm in diameter.
7.10.19.2 Removing the Wire Cleaner for the Primary
Charging Assembly
0010-8935
iR7105 / iR7095 / iR7086
1) Remove the primary charging assembly.
2) Move the clip base [1] fully to the rear, and remove the screw [2]; then,
remove the support plate [4] of the wire clean motor shaft [3], and detach
the clip base [1] from the cut-off [6] of the shielding plate [5] together
with the wire cleaner motor shaft [3].
F-7-127
3) Pick the wire cleaner with small pliers, and free the hook with your fin-
gers.
F-7-128
7.10.19.3 Removing the Wire Cleaner of the Transfer
Separation Charging Assembly
0010-8940
iR7105 / iR7095 / iR7086
1) Remove the transfer/separation charging assembly.
2) Move the felt holder [1] to the front as far as it moves.
F-7-129
3) Remove the motor cover [1] together with the motor.
F-7-130
4) Remove the E-ring [1]; then, pull the screw [2] to the front, and remove it
upward.
[1]
[1]
[2]
[1]
[2]
[3]
[3]
[2] [4] [1]
[5]
[6]
[6]
[1]
[1]