Canon iR7086, Руководство по обслуживанию

Страница: 594 / 735

Chapter 17
17-6
<ACC-STS>
T-17-2
MEDIA-NO
*** Display of paper brand information version in Norwegian
2
MEDIA-PL
*** Display of paper brand information version in Polish
2
MEDIA-PT
*** Display of paper brand information version in Portuguese
2
MEDIA-RU
*** Display of paper brand information version in Russian
2
MEDIA-SL
*** Display of paper brand information version in Slovenian
2
MEDIA-SV
*** Display of paper brand information version in Swedish
2
MEDIA-TW
*** Display of paper brand information version in Chinese (traditional)
2
MEDIA-BU
*** Display of paper brand information version in Bulgarian
2
MEDIA-CR
*** Display of paper brand information version in Croatian
2
MEDIA-RM
*** Display of paper brand information version in Romanian
2
MEDIA-CA
*** Display of paper brand information version in Catalan
2
COPIER > DISPLAY > ACC-STS
Sub item Description Level
FEEDER Use it to indicate the connection of the ADF.
0: not connected; 1: connected
1
SORTER Use it to indicate the connection of a finisher and the puncher.
<sorter type>
0: none
1: finisher
2: saddle finisher
3: saddle fi inserter
4: saddle fi paper folding unit
5: saddle fi in paper folding unit
6: stacker
<punch type>
0: none; 1: 2-hole; 2: 2-hole/3-hole; 3: 4-hole (FRN); 4: 4-hole (SWE)
1
DECK Use it to indicate the connection of a paper deck.
0: not connected; 1: connected (small); 2: connected (large)
1
CARD Use it indicates the connection of a card reader.
0: card reader connected, but card not inserted
1: card reader not connected, or card reader connected and card inserted
('1' if ready for copying; '0' if not ready for copying)
1
DATA-CON Use it to indicate the connection of a copy data controller.
0: not connected; 1: connected
1
RAM Use it to indicate the capacity of the memory mounted on the main controller PCB.
1024 MB
1
COINROBO Use it to indicate the connection of a coin vendor.
0: not connected; 1: connected
1
NIB Use it to indicate the connection of a network board.
0: no board connected
1: Ethernet board connected
2: TokenRing board connected
3: Ethernet board and TokenRing board connected
1
PS/PCL not used 1
RIP1 not used 1
NETWARE Use it to indicate installation of NetWare.
0: not installed; 1: installed
1
SEND Use it to indicate addition of the SEND function.
0: SEND function not added; 1: SEND function added
1
TRIM-CN Use it to indicate the connection of a trimmer.
1
0: not connected; 1: connected
COPIER > DISPLAY > VERSION
***: up graded version
Sub item Description Level
Use it to indicate the ROM version of a specific PCB (host machine, accessory).
- EX: <R-CON XX.YY>XX, where XX indicates a version number while YY indicates an R&D control No.
- In the absence of a PCB, the indication will be <-,->.