Canon iR7086, Руководство по обслуживанию

Страница: 678 / 735

Chapter 17
17-90
17.6.2 FEEDER
17.6.2.1 FEEDER Items
0011-6102
iR7105 / iR7095 / iR7086
T-17-64
934 transmission scan total 8 (black-and-white)
935 universal transmission scan total (color)
936 universal transmission scan total (black-and-white)
937 box scan (color)
938 box scan (black-and-white)
939 remote san (color)
940 remote scan (black-and-white) yes
941 transmission scan /fax (color)
942 transmission scan/fax (black-and-white)
943 transmission scan/i-fax (color)
944 transmission scan/i-fax (black-and-white)
945 transmission scan/e-mail (color)
946 transmission scan/e-mail (black-and-white)
947 transmission scan/FTP (color)
948 transmission scan/FTP (black-and-white)
949 transmission scan/SMB (color)
950 transmission scan/SMB (black-and-white)
951 transmission scan/IPX (color)
952 transmission scan/IPX (black-and-white)
953 transmission scan/database (color)
954 transmission scan/database (black-and-white)
955 transmission scan/local print (color)
956 transmission scan/local print (black-and-white)
957 transmission scan/box (color)
958 transmission scan/box (black-and-white)
FEEDER > OPTION
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level
DOC-F-SW * Use it to enable/disable stream reading mode.
1
settings
0: stream reading (default); 1: stream reading for small size only; 2: fixed reading
SIZE-SW Use it to enable/disable the mixed original detection mechanism (AB and inch).
1
settings
0: on (disable detection; default); 1: off (enable detection)
SLW-SPRT * Use it to decrease the separation speed for original pickup.
1
settings
0: normal mode (default); 1: deceleration mode
LS-DBL ** Use it to enable/disable ADF high-speed duplexing mode.
1
settings
0: on (high-speed duplexing mode; default); 1: off (low-speed duplexing mode)
STAMP-SW
** Use it to indicate the installation of a stamp.
1
settings
0: stamp not installed; 1: stamp installed (default)
HS-DBL * Use it to enable/disable ADF high-speed reversal mode.
1
settings
0: off (normal mode; default); 1: on (high-speed duplexing mode)
If an increase in productivity is desired in ADF duplexing mode, set it to '1'.
No. Counter description Support