Canon iR7086, Руководство по обслуживанию

Страница: 338 / 735

Chapter 8
8-38
F-8-66
3) Remove the screw [1], and detach the stack eliminator [2].
4) Remove the 2 screws [3], and detach the pickup assembly sensor base [4].
F-8-67
5) Disconnect the connector [1] (1 pc. each), and free the claw; then, detach
the right deck feed sensor [2] and the right deck pickup sensor [3].
F-8-68
When removing the scanner sensor, be sure to remove the paint used to lock
the claw in place in advance to prevent breaking the claw. When mounting
it, be sure the claw is not displaced or the sensor is not disoriented.
8.11.7 Manual Tray Assembly
8.11.7.1 Removing the Manual Feeder Tray Unit
0010-8989
iR7105 / iR7095 / iR7086
1) Open the manual feeder tray cover.
2) Remove the door tape [1].
- 1 screw [2]
3) Remove the connector cover [3].
- 1 screw [4]
F-8-69
4) Disconnect the connector [1], and free the cable from the plate of the host
machine (fixed in place using a cable clamp).
F-8-70
5) Remove the stopper plate [1].
- 1 screw [2]
F-8-71
6) Remove the manual feeder tray unit [1] in the direction of the arrow.
F-8-72
8.11.7.2 Fitting the Side Guide Timing Belt for the Manual
Feed Tray Assembly
0010-8990
iR7105 / iR7095 / iR7086
Butt the rack plate [1] of the manual feed tray against section A (open state).
Move the slide volume [2] in the direction of B, and fit the timing belt [3] to
the pulley [4].
[1]
[4]
[3]
[1]
[2]
[3]
[2]
[3]
[1]
[1] [2]
[3] [4]
[1]
[1]
[2]
[1]