Canon iR7086, Руководство по обслуживанию

Страница: 70 / 735

Chapter 2
2-12
F-2-16
9) Holding the grips (front, rear) on the pickup side of the machine, lift the
machine slightly, and remove the remaining pad and the plastic bag at the
same time.
F-2-17
10) Shift the 2 adjusters (front) [1] found at the bottom of the machine so that
they face upward, making sure that they are unlocked.
F-2-18
11) Take out the 2 slope plates [2] from the middle of the skid [1].
F-2-19
12) Remove the 2 pins [2] taped in place to the slope plate [1].
Turn over the slope plate [1], and match the pin hole of the skid and the
pin hole of the slope plate; then, fit a pin [2] (1 pc. each) through the holes.
Holding the grips (front, rear) on the delivery side of the machine, move
the machine off the skid by sliding it along the slope plates.
F-2-20
13) Remove the grip [1] fitted in step 5) while pushing the leaf spring with a
flat-blade screwdriver.
F-2-21
14) Remove the packing tape from the machine.
15) Open the front cover.
16) Open the compartment cover [2] found behind the front cover, and put
in the grip [3] for storage.
[1]
[1]
[2]
[1]
[2]
[1]