Canon iR7086, Руководство по обслуживанию

Страница: 399 / 735

Chapter 10
10-15
F-10-31
10.5.6 Waste Toner Drive Assembly
10.5.6.1 Removing the Waste Toner Drive Assembly
0010-9591
iR7105 / iR7095 / iR7086
Construction
F-10-32
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the drum drive assembly.
7) Remove the six screws [1], and detach the waste toner drive assembly
[2].
F-10-33
10.5.7 Multifeeder Pickup Drive Assembly
10.5.7.1 Removing the Multifeeder Pickup Drive
Assembly
0010-9593
iR7105 / iR7095 / iR7086
Construction
F-10-34
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Loosen the mounting screw on the rear fixing plate of the registration
roller assembly.
4) Remove the four screws [1], and disconnect the four connectors [2];
then, detach the multifeeder pickup drive assembly [3].
F-10-35
10.5.8 Lifter Drive Assembly
10.5.8.1 Removing the Lifter Drive Assembly (right deck)
0010-9594
iR7105 / iR7095 / iR7086
Construction
F-10-36
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the screw, and loosen the harness guide [1]; disconnect the
two connectors [2], and remove the four screws [3]; then, detach the lifter
drive assembly (for the right deck) [4].
[5] [4]
[4]
[3]
[2] [1]
[1] [1]
[2] [2]
[2]
[2]
[1]
[1]
[1]
[1]
[3]