Canon iR7086, Руководство по обслуживанию

Страница: 522 / 735

Chapter 14
14-22
F-14-51
14.8.4 Orientation of the Manual Feed Tray/Side Paper
Deck Pickup Roller
0010-9340
iR7105 / iR7095 / iR7086
Mount the roller using the steps used to remove it but in reverse while keep-
ing the following in mind:
- The pickup roller used in the front of the machine and the one used in the
rear are not compatible with each other.
- The pickup roller [1] used at the rear of the machine is identified by 8 mark-
ings [2] on its collar.
F-14-52
Pickup Roller at the Front
Mount the pickup roller [1] so that the round marking [2] on its side is toward
the rear of the machine while the cut-off [3] in the collar is toward the front
of the machine.
F-14-53
Pickup Roller at the Rear
Mount the pickup roller [1] so that the round marking [2] on its side and the
cut-off [3] in the collar are toward the rear of the machine.
F-14-54
14.8.5 Orientation of the Feeding Roller of the Manual
Feed Tray
0010-9342
iR7105 / iR7095 / iR7086
When mounting the feeding roller assembly [1] to the manual feed tray pick-
up assembly, be sure that the belt pulley [2] is toward the front of the ma-
chine. When mounting the feeding roller [3] to the feeding roller shaft [4],
be sure that the round marking [5] is toward the front of the machine.
F-14-55
14.8.6 Orientation of the Feeding Roller of the Side Paper
Deck
0010-9343
iR7105 / iR7095 / iR7086
When mounting the feeding roller assembly [1] to the side paper deck pickup
assembly, be sure that the belt pulley [2] is toward the front of the machine.
When mounting the feeding roller [3] to the feeding roller shaft [4], be sure
that the round marking [5] is toward the rear of the machine.
F-14-56
14.8.7 Adjusting the Pressure of the Deck/Cassette
Separation Roller
0010-9344
iR7105 / iR7095 / iR7086
If double feeding or pickup failure occurs during pickup, adjust the position
of the pressure spring of the separation roller.
- If double feeding occurs, move the hook of the spring in the direction of
arrow B.
- If pickup failure occurs, move the hook of the spring in the direction of A.
F-14-57
T-14-5
14.8.8 Adjusting the Pressure of the Pickup/Feeding
Roller of the Manual
0010-9345
iR7105 / iR7095 / iR7086
If double feeding or pickup failure occurs during pickup, adjust the position
of the pressure spring of the separation roller.
[2]
[1]
[4]
[3]
[5]
(front)
[1] [2]
[1]
[2]
[3]
Front
[1]
[2]
[3]
Rear
[1] Feeding roller [2] Separation roller
[3] Locking lever [4] Pressure spring
(front)
[3]
[4]
[2]
[1]
[5]
(front of machine)
[3]
[4]
[2]
[1]
[5]
[1]
[2]
[3]
[4]
A
B