Canon iR7086, Руководство по обслуживанию

Страница: 664 / 735

Chapter 17
17-76
INS-C/S Use it to expand the inserter function.(Only the inserter for the finisher)
2
settings
0: support only cover (default); 1: support multi-inserter (cover + interleaf)
MEMO:
- This item is only available to the inserter for the finisher. (The inserter for the perfect binder always support the multi inserter (cover
+ insert papers).
- This item is available both at copying and at printing.
TBIC-RNK Use it to enable/disable halftone uneven density reduction mode.
2
By changing the degree of dot distribution, the half-tone pitch unevenness at copying is lightened.
When setting the value bigger, the dots are concentrated and the degree of half-tone pitch unevenness is lightened.
settings
1 to 5 (default: 2)
Take care not to set the value small because the dots are diversified and the degree of half-tone pitch unevenness is increased if setting
the value smaller.
MEMO:
This item is not used in normal servicing.
HDCR-DSP Use it to switch between HDD deletion modes.
2
settings
1: once using 0s (default); 2: once using random data; 3: 3 times using random data
MEMO: function for HDD initialization
This is the function to clear the data on HDD completely by overwriting the 0 (null) data and random data to file data area at the moment
of deleting files logically (timing for deleting the administrative information data) in HDD.
BCK-CVR Use it to enable/disable the back cover function.
2
settings
0: off (default) ; 1: on
Effective at attaching cover inserter.
JOB-INVL Use it to set job intervals for an interrupt.
2
settings
0: continue with next job immediately for interrupt (default)
1: start next job after delivery of last sheet of interrupt
2: start next job after last sheet of all jobs
LGSW-DSP Use it to enable/disable display of 'enable/disable log indication' for Additional Functions Mode.
2
settings
0: do not display (default); 1: display
PCL-COPY Binder control mode for COPIES command of PCL
2
This is the mode to unite the operations because the way to control the COPIES command of PCL is different between the Canon PCL
and the non-Canon PCL.
settings
0: [default] to control by page according to the value of COPIES command specified at each page.
1: It regards the value of COPIES command specified at page-1 as the number of bind, and invalid the value of COPIES command of
the following page and after (only at sort mode. in the case of non-sort mode, it will be the same control as at '0' setting).
2 through 65535: backup
'0' is for control method with Canon. By setting '1', it will be the same control method with non-Canon PCL.
PRJOB-CP Setting for count pulse (on/off) at receipt print/report print.
2
When using account-managing device (e.g., coin vendor, non-Canon control card), it switches over (on/off) the count pulse notice for
every page at receipt print/report print.
settings
0: do not generate count pulse (default); 1: generate count pulse
COPIER > OPTION > USER
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
***: up graded version
Sub item Description Level