Canon iR7086, Руководство по обслуживанию

Страница: 650 / 735

Chapter 17
17-62
FIX-EXP Selection of fixing splash/streak restriction mode
1
Aiming at restricting fixing splash/streak, select VD down (toner level down/density down) control mode.
settings
0: OFF (Select it when the developing assembly durable number of sheets is 10,000 or less and the density is thin)
1: VD down control according to the developing assembly durable number of sheets (0~10,000 sheets)/water volume.
2: VD down control [default] according to the developing assembly durable number of sheets (0~10,000 sheets)
3: Fixed amount VD down control (Select when the developing assembly durable number of sheets is 10,000 or more and the level
of fixing splash/streak is bad)
Usage:
- When this setting value was changed, open/close the front cover or turn OFF/ON the main power supply (to operate the potential
control).
- If the level of fixing splash/streak is bad at the setting value '1~3', return the setting value to '2 [default]' and make smaller the value
of COPIER>ADJUST>V-CONT>VD-OFST (However, it should be adjusted within the tolerance range of the density).
- When the density is thin at changing DC controller PCB/clearing RAM, make the setting value '0' (Because the developing
assembly durable number of sheets count is cleared to 0 also when the developing assembly durable number of sheets exceeds
10,000).
In the case that the density is normal, keep the setting value '2 (default)'.
- When setting the setting value other than '2 (default)', return the setting value to '2 (default)' later at changing to a new developing
assembly.
MEMO:
The developing assembly durable number of sheets is the internal counter and not displayed.
OVLP-MD Use it to enable/disable double-feeding detection mechanism.
1
0: enable (default); 1: disable
ABC-MODE * Use it to switch over original background processing. (digital ABC setting switchover)
1
A higher setting (between 1 and 3) will limit the background more.
settings
-1: limits removal of background density (for photo original or originals with complex elements)
0: off (no idle rotation)
1: remove background 1
2: remove background 2
3: remove background 3
SJOB-CL
*** Switch for enabling scan job cancellation by logout
1
To enable scan jobs to be canceled upon completion of the scanning operation if logout is initiated.
When the user asks for the item to be provided
0: Canceling is disabled. [default]
1: Canceling is enabled.
IFX-CHIG
*** Setting of character count for ignoring IFAX received mail text
1
When the text of a mail during IFAX reception is shorter than the number of characters set, it is ignored, and the text is neither printed
nor sent.
If the mail text has been lost as a result of setting the value to a number other than "0", and there is no attached TIFF file, a blank
page (except the header and footer) will be printed and sent.
* Kanji are treated as 2-byte characters, and the carriage return and other control codes are also included in the character count.
Settings
0 to 999 (unit: number of characters)
0: The mail text is not ignored.
[Factory setting/value after clearing RAM: 0]
UNLMTBND
*** Support switch for print jobs exceeding 400 binders
1
To select whether to support print jobs for which the number of binders exceeds 400. In accordance with the job attributes, the print
jobs are performed while making repeated use of the binders.
0: Whether to provide support is automatically set depending on the connection status of the print server.
When the print server is not connected: Not supported
When the print server is connected: Supported
1: Not supported
Users who do not wish to print jobs containing large numbers of binders (*) should use the '1' setting.
*: These are jobs that use staples or other finishing to a great extent in a single job. This does not apply to jobs which feature heavy
finishing involving the output of multiple numbers of copies.
COPIER > OPTION > BODY
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
***: up graded version
Sub item Description Level