Canon iR7086, Руководство по обслуживанию

Страница: 523 / 735

Chapter 14
14-23
- If double feeding occurs, move the hook of the spring in the direction of
arrow A.
- If pickup failure occurs, move the hook of the spring in the direction of B.
F-14-58
14.8.9 Location of the solenoids
0011-8945
iR7105 / iR7095 / iR7086
F-14-59
14.8.10 Position of the Fixing Web Solenoid (SL2)
0010-9348
iR7105 / iR7095 / iR7086
a. If the Fixing Web Is New
Use the position of the solenoid [1] using the screw [2] so that the travel
of the drive lever is 8.2 mm.
F-14-60
b. If the Fixing Web Is Not New
Before removing the solenoid, check the position [A] of the drive lever
when the solenoid [1] is ON. After replacing the solenoid, make
adjustments using the screw [2] so that the position of the drive lever is
the same (when the solenoid is ON).
F-14-61
14.8.11 Position of the Delivery Flapper Solenoid (SL3)
0010-9350
iR7105 / iR7095 / iR7086
Use the screw [2] to adjust the position of the solenoid [1] so that the drive
lever is fully pushed when the solenoid is ON (i.e., when the steel core is
drawn).
F-14-62
14.8.12 Position the Fixing/Feeder Unit Locking Solenoid
(SL4)
0010-9351
iR7105 / iR7095 / iR7086
Use the screw [3] to adjust the position of the solenoid [1] so that the locking
lever [2] is 10.5 -/+ 0.5 mm away from the frame when the solenoid is ON
(i.e., when the steel core is drawn).
F-14-63
SL2 : Fixing web solenoid
SL3 : Delivery flapper solenoid
SL4 : Fixing/feeder unit locking solenoid
SL6 : Manual feed pickup latch solenoid
SL7 : Deck (right) pickup solenoid
SL8 : Deck (left) pickup solenoid
SL9 : Cassette 3 pickup solenoid
SL10: Cassette 4 pickup solenoid
SL11: Reversing flapper solenoid
B
A
SL9
SL10
SL7
SL8
SL6
SL11
SL3
SL4
SL2
8.2mm
[1]
[2]
A
[1]
[2]
[1]
[2]
Fully pushed.
10.5±0.5mm
[1]
[2]
[3]