Canon iR7086, Руководство по обслуживанию

Страница: 639 / 735

Chapter 17
17-51
CNT-MCON Use it to reset the service counter controlled by the main controller PCB.
1
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
CNT-DCON Use it to reset the service counter controlled by the DC controller PCB.
1
Execute the operation when replacing the DC Controller or clearing RAM.
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
OPTION ** Use it to initialize the RAM on the reader controller PCB. (items under COPIER>OPTION only)
1
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
MMI Use it to reset user mode settings.
1
<Target of Clear>
- backup data for copier control panel (user settings)
- backup data for common settings (user settings)
- various backup data (user settings)
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the power.(Cleared after turning OFF/ON the main power.)
MN-CON Use it to initialize the RAM on the main controller PCB.
1
<Procedure>
1) Print out the particulars of service mode by making the following selections: COPIER > FUNCTION > MISC-P > P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.(Cleared after turning OFF/ON the main power.)
4) As necessary, enter the data printed out using P-PRINT.
CARD Use it to reset the data related to the card ID (group).
1
<Procedure>
1) Select the item, and press the OK key.
2) Turns off and then back on the main power.(Cleared after turning OFF/ON the main power.)
ALARM Use it to reset the alarm log.
1
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(Cleared after turning OFF/ON the main power.)
SLT-CLR Not in use. 1
LANG-ERR Use it to reset a language-related error (E747).
1
Use it when a language-related error (E747) occurs after changing into other language than the default language. By implementing this
item, the status recovers from the error.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.After the main power OFF/ON, return to the default language.
ERDS-DAT Use it to reset the E-RDS-related settings.
1
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(Cleared after the main power OFF/ON)
See the chapter of RDS in service manual for more detail.
SND-STUP Use it to reset the transmission read settings.
2
Use it when the reading setting display of the sending screen has garbage characters after changing the language.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(Cleared after the main power OFF/ON)
CA-KEY Use it to reset the CA certificate and key.
2
In the case that the following works or operations were implemented, perform this item.
- At changing HDD/formatting
- At changing the main controller/clearing RAM
- At replacing or disposing the machine (To prevent compromise)
Do not use it for other cases than the above. Key/certificate/CA certificate installed by users may be cleared.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(Cleared after the main power OFF/ON)
MEMO:
CA certificate is MEAP application using Embedded-RDS, SSL client connection, and key pair is the function for IPP SSL function,
RUI SSL function and MEAP SSL function.
COPIER > FUNCTION > CLEAR
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level