Canon iR7086, Руководство по обслуживанию

Страница: 680 / 735

Chapter 17
17-92
17.6.4 BOARD
17.6.4.1 BOARD Items
0011-6132
iR7105 / iR7095 / iR7086
T-17-66
17.7 TEST (Test Print Mode)
17.7.1 COPIER
17.7.1.1 COPIER Items
0011-6092
iR7105 / iR7095 / iR7086
<PG>
T-17-67
<NETWORK>
T-17-68
BOARD > OPTION
Sub item Description Level
FONTDL Use it to enable/disable display of the service setup screen for fonts listed by the PS kanji font downloader.
1
settings
0: disable display (default); 1: enable display
MENU-1
to MENU-4 Use it to enable/disable display of levels 1 thorough 4 for the printer setup menu.
2
settings
0: disable display (default); 1: enable display
COPIER > TEST > PG
Sub item Description Level
TYPE Use it to select a type of test print. 1
<Procedure>
1) Select the item, and type in the number of the test print you want.
2) Press the Start key so that test printing starts.
3) When done, put back the value to '0'.
settings: 0 to 50
0: image from CCD (normal print); 1: grid; 2: 17-gradation (error diffusion); 3: 17-gradation (dither screen); 4: blank; 5: halftone 80H
(error diffusion); 6: halftone 80 H (dither screen); 7: solid black; 8: horizontal lines (space: 27 dots; line width: 40 dots); 9: horizontal
lines (space: 50 dots; line width: 60 dots); 10: horizontal lines (space: 3 dots; line width: 2 dots); 11: halftone 60 H (error diffusion);
12: halftone 60 H (dither screen); 13: halftone 30 H (error diffusion); 14: halftone 30 H (dither screen); 31: 1200-dpi vertical lines
(space: 21 dots; line width: 8 dots); 32: 1200-dpi horizontal lines (space: 21 dots; line width: 8 dots); 33: for check on displacement of
image in main scanning direction
TXPH Use it to set the image mode for test printing. 1
settings: 0 to 4
0: text (default); 1: photo; 2: auto; 3: text/photo/map; 4: film print
PG-PICK Use it to select the source of paper for test printing. 1
settings: 1 to 8
1: right deck (default); 2: left deck; 3: cassette 3; 4: cassette 4; 5: side paper deck; 6: manual feeder tray; 7 to 8: not used;
2-SIDE Use it to set the output mode for test printing. 1
settings:
0: simplexing; 1: duplexing
PG-QTY Use it to set a copy count for test printing. 1
setting:
1 to 999 (default: 1)
COPIER > TEST > NETWORK
***: up graded version
Sub item Description Level
PING Use it to issue the PING command.
1
Use it to check the connection between the machine and the network (TCP/IP only).
Use it to check the connection to the network at time of installation or when suspecting a fault in the connection to the network.
IPV6-ADR
*** Destination address of PING (IPv6)
1
Set the destination address of PING issued in "COPIER>TEST>NETWORK>PING-IP6".
IPv6 address
Hexadecimal characters (0-9, a-f) and separators (:)(.), 39 characters at maximum
It should be a consistent character string as an address of IPv6.
Usage
PING is issued to check continuity in the network in the IPv6 environment.
Set the destination address of IPv6 in this mode.