manualshive.com logo in svg

Canon iR7086, Руководство по обслуживанию

Принтер Canon iR7086 - мощное устройство для печати и копирования с высокими техническими характеристиками. Для поддержания работы устройства необходимо регулярно обновлять его сервисный мануал. Скачайте бесплатно руководство по обслуживанию на manualshive.com и узнайте подробную информацию о вашем принтере.

Поделиться
Скачать
background image

Chapter 17

17-59

CONFIG 

Select several system software stored in the hard disk, change the nation/area, paper size.

1

<Procedure>
1) Select <CONFIG>.
2) Select the item to change.
3) Press the +/- key. (Each press changes the setting.)
4) Display the contents to be needed, press OK key.
5) Turn off and then back on the main power switch.
XXYYZZAA
XX: country (e.g., JP=Japan)
YY (*): language (e.g., ja=Japanese)
ZZ: (*) destination (e.g., 00=Canon)
AA: paper size series (00=AB; 01=inch; 02=A; 03=inch/AB)
*: Cannot change the setting.

TR-SP-C1 

Use it to change the transfer/separation output settings for pickup from the right deck.

1

settings

MEMO:

0: plain paper (default); 1: recycled paper; 2: tracing paper; 3: Thick paper
- In the case that the setting value is 0, control as for the paper that was set at the user mode or manual feeding.
- In the case that the setting value is 1~3, control as for the recycled paper/tracing paper/thick paper. However, only in the case of 
the setting of tracing paper/tab paper at the user mode or manual feeding, the setting of the user mode and manual feeding is 
prioritized over this service mode setting.

TR-SP-C2

Use it to change the transfer/separation output setting for pickup from the left deck.

1

settings
0: plain paper (defeat); 1: recycled paper; 2: tracing paper; 3: For thick paper

MEMO:

- In the case that the setting value is 0, control as for the paper that was set at the user mode or manual feeding.
- In the case that the setting value is 1~3, control as for the recycled paper/tracing paper/thick paper. However, only in the case of 
the setting of tracing paper/tab paper at the user mode or manual feeding, the setting of the user mode and manual feeding is 
prioritized over this service mode setting.

TR-SP-C3

Use it to change the transfer/separation output setting for cassette 3.

1

settings
0: plain paper (default); 1: recycled paper; 2: tracing paper; 3: For thick paper

MEMO:

- In the case that the setting value is 0, control as for the paper that was set at the user mode or manual feeding.
- In the case that the setting value is 1~3, control as for the recycled paper/tracing paper/thick paper. However, only in the case of 
the setting of tracing paper/tab paper at the user mode or manual feeding, the setting of the user mode and manual feeding is 
prioritized over this service mode setting.

TR-SP-C4

Use it to change the transfer/separation output setting for pickup from cassette 4.

1

settings
0: plain paper (default); 1: recycled paper; 2: tracing paper; 3: For thick paper

MEMO:

- In the case that the setting value is 0, control as for the paper that was set at the user mode or manual feeding.
- In the case that the setting value is 1~3, control as for the recycled paper/tracing paper/thick paper. However, only in the case of 
the setting of tracing paper/tab paper at the user mode or manual feeding, the setting of the user mode and manual feeding is 
prioritized over this service mode setting.

TR-SP-MF 

Use it to change the transfer/separation output setting for pickup from the manual feeder tray.

1

settings
0: plain paper (default); 1: recycled paper; 2: tracing paper; 3: For thick paper

MEMO:

- In the case that the setting value is 0, control as for the paper that was set at the user mode or manual feeding.
- In the case that the setting value is 1~3, control as for the recycled paper/tracing paper/thick paper. However, only in the case of 
the setting of tracing paper/tab paper at the user mode or manual feeding, the setting of the user mode and manual feeding is 
prioritized over this service mode setting.

TR-SP-DK 

Use it to change the transfer/separation output setting for pickup from the side paper deck.

1

settings
0: plain paper (default); 1: recycled paper; 2; tracing paper; 3: For thick paper

MEMO:

- In the case that the setting value is 0, control as for the paper that was set at the user mode or manual feeding.
- In the case that the setting value is 1~3, control as for the recycled paper/tracing paper/thick paper. However, only in the case of 
the setting of tracing paper/tab paper at the user mode or manual feeding, the setting of the user mode and manual feeding is 
prioritized over this service mode setting.

COPIER > OPTION > BODY

 *: model equipped with DADF-Q1 (outside Japan: iR7105/7095;  inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
***: up graded version

Sub item

Description

Level

Содержание iR7086
































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iR7086

Canon iP2600 - PIXMA Color Inkjet Printer Setup Instructions preview
iP2600 - PIXMA Color Inkjet Printer
Бренд: Canon Страницы: 2
Canon FAXPHONE L80 Setup Instructions preview
FAXPHONE L80
Бренд: Canon Страницы: 8
Canon ImageCLASS 2300 Network Manual preview
ImageCLASS 2300
Бренд: Canon Страницы: 102
QMS 1060 User Manual preview
1060
Бренд: QMS Страницы: 311
Oce im4530 Scanning Manual preview
im4530
Бренд: Oce Страницы: 136
Oce im4512 Facsimile Operation Manual preview
im4512
Бренд: Oce Страницы: 116
Oki C3300n Specifications preview
C3300n
Бренд: Oki Страницы: 1
Canon imageRUNNER 5075 Reference Manual preview
imageRUNNER 5075
Бренд: Canon Страницы: 502
Cannon imageRUNNER 5075 Support Manual preview
imageRUNNER 5075
Бренд: Cannon Страницы: 268
Xerox Phaser 6300 Service Manual preview
Phaser 6300
Бренд: Xerox Страницы: 13
Xerox AltaLink B8145 User Manual preview
AltaLink B8145
Бренд: Xerox Страницы: 418
Microplex SOLID T11 DT Operator'S Manual preview
SOLID T11 DT
Бренд: Microplex Страницы: 135
A&D TM-2480 Instruction Manual preview
TM-2480
Бренд: A&D Страницы: 66
Kyocera KM-2560 Service Manual preview
KM-2560
Бренд: Kyocera Страницы: 392
BT PaperJet 65E User Manual preview
PaperJet 65E
Бренд: BT Страницы: 64
Xerox Nuvera 120 EA Features Manual preview
Nuvera 120 EA
Бренд: Xerox Страницы: 34
Epson WorkForce Pro WF-C8190DTWC User Manual preview
WorkForce Pro WF-C8190DTWC
Бренд: Epson Страницы: 162
Epson WorkForce Pro WP-4095 DN Specification preview
WorkForce Pro WP-4095 DN
Бренд: Epson Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды