Canon iR7086, Руководство по обслуживанию

Страница: 50 / 735

Chapter 1
1-20
Original type Sheet, book, 3-D object (2 kg max.)
Maximum original size A3/279.4 x 431.8 mm (11 x 17)
Reproduction ratio 100% (1:1), reduce (1:0.250, 1:0.500, 1:0.611, 1:0.707, 1:0.816,
1:0.865), enlarge (1:1.154, 1:1.224, 1:1.414, 1:2.000, 1:4.000), zoom
(1:0.250 to 4.000) (25% to 400%:in increments of 1%)
Fine adjustment of reproduction
ratio for 100%, in user mode
Warm-up time 6 min or less (20 deg C, rated input)
First print time feeder: 4.1 sec (stream reading, right deck (manual), 1 original, 100%,
A4/LTR, non-AE, straight delivery, lamp pre-heating included)
copyboard: 2.8 sec (book mode, right deck, manual, 100%, A4/LTR,
non-AE, straight delivery, lamp pre-heating not included)
Continuous reproduction 1 to 9999 prints
Reading speed iR7105/7095
single-sided: 85 ipm
double-sided: 40 ipm
iR7086
single-sided: 68 ipm
double-sided: 46 ipm
Printing speed iR7105: 105 ppm
iR7095: 95 ppm
iR7086: 86 ppm
Reading resolution 600dpi X 600dpi
Printing resolution 1200 (equivalent) x 600 dpi
Gradation 256 gradations
Paper deck capacity right/left: 1500 sheets (80 g/m2 paper)
Cassette capacity cassette 3/4: 550 sheets (80 g/m2 paper)
Multifeeder tray capacity manual feeder tray: 50 sheets (80 g/m2 paper)
Hard disk 40GB
Non-image width (leading edge) Direct/R-E: 4.0 + 1.5/-1.0 mm (when an ADF is used: 4.0 -/+1.8 mm/-
1.4 mm)
Non-image width (trailing edge) Direct/R-E: 2.5 -/+1.5 mm (when an ADF is used: 2.5 -/+1.8mm)
Non-image width (left/right) Direct/R-E: 2.5 -/+1.5 mm (when an ADF is used: 2.5 -/+1.8mm)
Image margin (leading edge) Direct/R-E: 4.0 + 1.5/-1.0 mm (when an ADF is used: 4.0 -/+1.5/-1.0
mm)
Image margin (trailing edge) Direct/R-E: (one-sided) 2.5 -/+1.5 mm (when an ADF is used:2.5 -/+1.5
mm)
Direct/R-E: (two-sided) 2.5 -/+2.0 mm (when an ADF is used: 2.5 -/+2.0
mm)
Image margin (left/right) Direct/R-E: 2.5 + 1.5 mm (when an ADF is used: 2.5 -/+1.5mm) (on left,
0.5 mm or more)
Auto Clear yes (2 min standard; may be varied between 0 and 9 min in 1-min
increments)
Auto power off No
Low-power mode yes (15 min standard; may be varied for following in user mode: 10, 15,
20, 30, 40, 50, 60, 90 min; 2, 3, 4 hr)
Sleep mode yes (60 min standard; may be varied for following in user mode: 10, 15,
20, 30, 40, 50, 60, 90 min; 2, 3, 4 hr)
Energy save mode yes (-10% standard; may be varied for following in user mode: -10%, -
25%, -50%; 0% if no return)
Option See "System Configuration."
Operating environment
(temperature range) See Installation>Selecting the Site of Installation.
Operating environment
(humidity range) See Installation>Selecting the Site of Installation.
Operating environment
(atmospheric pressure) 810.6 to 1013.3 hpa (0.8 to 1.0 atm)
Power supply rating 200 V/15 A (50/60 Hz) 208 V/12 A (60 Hz) 230 V/13 A (50 Hz)
Power consumption (maximum) 2.5 kw or less
Noise during copying: 79 dB or less; during standby: 63 dB or less
Ozone initially, 0.02 ppm or less avr and 63 dB or less during standby
over time (after 250,000 prints), 0.05 ppm or less avr, 0.10 ppm or less
max.
Dimensions 1163 mm (W) x 795 (D) x 1430 (H) mm approx.
Weight 280 kg (approx.; including ADF)
Environmental consideration drum heater: standard for all models
cassette heater (common for all): standard for 100/200V model; not
offered for 208V model; offered as service part for 230V model
reader heater (common for all): optional for 100/200V model; not
offered for 208V model; offered as service part for 230V model
deck heater (common for all): optional for 100/200V model; not offered
for 208V model; offered as service part for 230V model