Canon iR7086, Руководство по обслуживанию

Страница: 597 / 735

Chapter 17
17-9
CNTR: reading of soft counter for source of paper
SIZE: paper size
The jam detail screen can only display jam codes that occur in the units shown below.
- Main unit
- ADF
- Paper deck
- Finisher
When a jam occurs in other units, the jam detail screen is not displayed, but you can specify a jam occurrence location (unit) using the jam-processing screen (in
animation) displayed in the user screen.
Measures for a jam (when both of a finisher and stacker are installed)
A finisher and stacker share some jam codes.
For such jam codes, the jam detail screen always displays finisher information (illustrations, sensor numbers), but the jam might be actually occurring in the stacker.
Be sure to check the display of "location, category" ( "L" ) in the jam history screen to specify the unit where the jam occurs.
<ERR>
F-17-10
No.: number indicating order of error occurrence (the higher the number, the older the error)
DATE: date of error occurrence
TIME1: time of error occurrence
TIME2: time of error recovery
CODE: error code
DTL: detail code (if none, '0000')
L: location grouping
P: not used
<HV-STS>
07 side paper deck
08 manual feeder tray
09 duplexing assembly
0A inserter for finisher (upper)
0B inserter for finisher (lower)
60 for future use
61 for future use
Code Location grouping
00 main controller
01 DADF
02
finisher / paper folding unit / insertion unit / panch unit /
trimmer
04 reader unit
05 Printer unit
06 PDL board
51 stacker
61 for future use
Code Description