Canon iR7086, Руководство по обслуживанию

Страница: 374 / 735

Chapter 9
9-18
F-9-55
Check the fixing cleaning belt for skew, wrapping, and wrinkling. Further,
be sure that the winding direction and the mounting orientation are as indi-
cated.
F-9-56
2) After mounting the fixing cleaning belt, move the plunger [4] of the clean-
ing belt feeding solenoid into the direction of the arrow.
F-9-57
If you have replaced the cleaning belt, be sure to return the setting under
COPIER > COUNTER > MISC > FIX-WEB to '0' in service mode.
9.5.11 Claw Jam Sensor
9.5.11.1 Removing the Claw Jam Sensor
0010-9540
iR7105 / iR7095 / iR7086
1) Remove the fixing assembly.
2) Remove the 2 screws, and detach the lower separation claw assembly.
3) Detach the claw jam sensor [1] from the right side of the lower delivery
assembly.
F-9-58
9.5.12 External Delivery Sensor
9.5.12.1 Remove the External Delivery Sensor
0010-9543
iR7105 / iR7095 / iR7086
1) Remove the external delivery roller.
2) Remove the 2 screws [1], and disconnect the connector [2]; then, de-
tach the external sensor assembly [3].
F-9-59
3) Disconnect the connector [1], and detach the external delivery sensor [2].
F-9-60
9.5.13 Internal Delivery Sensor
9.5.13.1 Removing the Internal Delivery Sensor
0010-9545
iR7105 / iR7095 / iR7086
1) Remove the fixing assembly.
2) Open the upper delivery assembly, and remove the 2 screws [1]; then,
detach the internal delivery sensor assembly [2].
F-9-61
3) Disconnect the connector [1], and detach the internal delivery senor [2].
[3] [1]
[2]
Take up roller
Cleaning belt
feeding roller
[4]
[1]
[1]
[1]
[3]
[2]
[1]
[2]
[2]
[1]
[1]