Canon iR7086, Руководство по обслуживанию

Страница: 342 / 735

Chapter 8
8-42
F-8-93
6) Open the manual feed tray.
7) Remove the 11 mounting screws [1], and detach the manual feed tray
pickup assembly [2].
F-8-94
8) Remove the 2 mounting screws [1], and detach the upper guide plate [2].
F-8-95
9) Remove the 2 mounting screws [1] found at the bottom, and detach the
lower cover [2].
F-8-96
10) Remove the 2 mounting screws [1], and detach the middle guide plate
[2].
F-8-97
11) Remove the 2 mounting screws [2] of the sensor unit [1].
F-8-98
12) Disconnect the connector [1], and detach the sensor unit [2].
13) Remove the sensor [3] from the sensor unit [2].
F-8-99
8.11.13 Manual Feed Pickup Solenoid
8.11.13.1 Position of the Pickup Roller Release Solenoid
of the Manual Feed Tray
0010-9043
iR7105 / iR7095 / iR7086
To make fine adjustments, slide the solenoid in the direction of A so that the
gap between the shutter [1] and the shutter plate [2] is 0.4 +/-0.2 mm while
the solenoid is being pulled.
F-8-100
[3]
[1]
[2]
[1]
[1]
[1]
[1] [1]
[2]
[1]
[2] [1]
[1]
[2]
[1]
[2]
[1]
[1] [2] [2]
[1]
[2]
[3]
A