Cambium Networks PMP 450 Series, Руководство по установке

Страница: 230 / 292

Chapter 5: Installation 230
l
ALWAYS wear cut-resistant gloves (check the label to ensure they are cut
resistant).
l
ALWAYS wear protective eyewear.
l
ALWAYS use a rotary blade tool to strip the cable (DO NOT use a bladed
knife).
Warning
Failure to obey the following precautions may result in injury or death:
l
Use the proper hoisting grip for the cable being installed. If the wrong
hoisting grip is used, slippage or insufficient gripping strength will result.
l
Do not reuse hoisting grips. Used grips may have lost elasticity, stretched,
or become weakened. Reusing a grip can cause the cable to slip, break, or
fall.
l
The minimum requirement is one hoisting grip for each 60 m (200 ft) of
cable.
Cut t o lengt h and fit hoist ing grips
1 Cut the main drop cable to length from the top LPU to the bottom LPU.
2 Slide one or more hoisting grips onto the top end of the drop cable.
3 Secure the hoisting grip to the cable using a special tool, as recommended by the manufacturer.
Terminat e w it h RJ4 5 connect ors
Caution
Check that the crimp tool matches the RJ45 connector, otherwise the cable or
connector may be damaged.
1 Strip the cable outer sheath and fit the RJ45 connector load bar.
2 Fit the RJ45 connector housing as shown. To ensure there is effective strain relief, locate the cable
inner sheath under the connector housing tang.