Cambium Networks PMP 450 Series, Руководство по установке

Страница: 69 / 292

Chapter 2: System hardware 69
Status information provided
LED Color when
active
SM / BHS in
“Operating”
Mode SM / BHS in “Aiming” Mode Note
GPS/3 Red Unused Unused
ACT/4 Yellow Presence of
data
activity
on the
Ethernet
link Presence of data activity
on the Ethernet link Flashes during data
transfer. Frequency
of flash is not a
diagnostic indication.
MAIN
LNK/5 For 450i
Series
Red/ Green/
Orange
(bi-colored
for
10/100/1000)
Ethernet link Continuously lit when
link is present.
10BASE-T : Red
100BASE-T : Green
1000BASE-T :
Orange
For 450
Series
Green
Ethernet link Continuously lit when
link is present.
Table 41 :5 GHz 450b SM/BHS LED descriptions
Status information provided
LED Color when active SM / BHS in
“Operating”
Mode SM / BHS in “Aiming” Mode Note
POWER Blue DC power Flashes Yellow
during boot-up.
Flashes Blue when
operating. Always
lit after 10-20
seconds of power
on.
SYNC Green Presence of
sync These three LEDs act as a bar graph
to indicate the relative quality of
alignment. As power level improves
during alignment, more of these LEDs
are lit. Lit when SM/BHS is
in sync with an
AP/BHM.
SES Yellow Session
Indicator Lit when SM/BHS is
in session.
GPS Red Unused Unused
ETH Red/Green/Orange Ethernet Link Flashes during