198
3
Press the power button to turn on the TeraStation.
4
When the message "Recovery I41 PushFuncToStart" appears on the LCD panel, press the function button.
5
The recovery of the setting is started. The TeraStation automatically shuts down when recovery is completed.
6
After the shutdown, the message "Recovery I39 Change Boot" will be displayed on the LCD panel.
7
Set the Boot Mode switch to [HDD].
8
Press the power button to start the TeraStation.
This completes the recovery of the settings.
Checking the TeraStation Logs
Follow the procedure below to check the TeraStation's logs.
1
In the TeraStation's Web Admin interface, click [Management].
2
Click
next to [Logs].
3
Select a log to view.
The fi le operation log stores fi le operations performed on the internal hard drives. File operations on USB drives are
not logged.
To transfer logs
1. Click [Edit].
2. Enable [Syslog Transfer].
3. Enter the IP address of the syslog server where you want to transfer the logs to.
4. Select the type of log that you want to transfer from [Logs To Transfer].
5. Click [OK].
•
FTP logs cannot be written to a syslog server.
•
Logs are in UTF-8 format. Your Syslog server must support UTF-8 encoding.