85
3
Select the hard drive with the fl ashing status LED, then click [Dismount Disk].
4
The status LED will stop ashing and glow steadily.
5
Unlock the failed drive by pushing the unlock button and swing the lock mechanism out.
Hard drives without red Status LEDs lit are still on. Do not unplug or remove them. If you do so, data may be
lost or the TeraStation may malfunction.
6
Pull out the hard drive cartridge and remove it from the TeraStation.
7
Insert the new hard drive (sold separately) into the empty slot. Slide the drive in with the locking mechanism open.
Swing the lock back down until it clicks into place.
8
For RAID 0
When the replacement hard drive is recognized, the status LED will fl ash red and the message "Set From Web I32
New Diskx ready" will be displayed on the LCD panel.
Select [Drives] - [RAID] - the RAID array in the TeraStation's Web Admin interface and click [Delete RAID Array].
Select the replacement hard drive by navigating to [Drives] - [Drives] and click [Format Disk] to format the new
drive. Confi gure RAID mode by selecting [Drives] - [RAID] after formatting the hard drive.
If a hard drive malfunctions in RAID 0, all data on the RAID array will be lost. All of the settings for the shared folders
(such as access restrictions) will be erased after replacing a drive from a RAID 0 array. Create a shared folder before
use.
For Normal Mode
When the replacement hard drive is recognized, the status LED will flash red and the message "Press FuncSW
I31 New Disk x ready" will be displayed on the LCD panel. Hold down the function button on the front of the
TeraStation for 3 seconds until it beeps. The drive will be formatted as a normal hard drive. If this drive is removed
from the TeraStation, all shared folder settings (such as access restrictions) will be lost. Create a shared folder on the
drive before use.
You have now completed the hard drive replacement process.