216
TS5200D
1
Power
Button
Power on: Press the power button.
Power off : Press the power button twice within 3 seconds.
To power on, connect the power cable and wait for 10 seconds. Then press the power button.
2
Info
LED
If there is a message about the current status, the amber info LED is illuminated. Check the LCD panel for current
status.
3
Error
LED
The red error LED is illuminated when an error occurs. Check the LCD panel for more information.
4
LAN1
LED
When LAN port 1 is connected to a network, it is illuminated in green. The light next to LAN port 1 will be
illuminated as well.
5
LAN2
LED
When LAN port 2 is connected to a network, it is illuminated in green. The light next to LAN port 2 will be
illuminated as well.
6
LCD
Panel
Displays the status of the TeraStation.
7
Display
Button
Switches between the diff erent display modes.
8
Function
Button
Use this button to perform the following operations:
•
DirectCopy
• Removal of USB devices
• Rebuild RAID array after replacing hard drives
•
Failover (Backup TeraStation)